Sustainability
Stronger floors. Smaller footprint.
Levelcore systems are engineered for performance—and verified to cut embodied carbon across real projects. See the numbers, not the noise.
Estimate your carbon impact
Download EPD& SDS
How We Reduce Carbon
We map carbon across the product life cycle—materials, manufacturing, transport, installation, and service life—then remove what doesn’t need to be there.
Optimized
Formulations
Efficient binders and fillers to lower product carbon factors (A1–A3)
Material
Efficiency
Efficient binders and fillers to lower product carbon factors (A1–A3)
Transport
Smart
Efficient binders and fillers to lower product carbon factors (A1–A3)
Longer
Service Life
Fewer replacements over the building’s life = fewer new materials made and moved.
Install
Efficiently
Streamlined steps can reduce site trips and energy use.
Micro note: Actual reductions vary by product and project. See calculator and EPDs for verified values.
Numbers & Proof
If we can’t measure it, we don’t claim it. Download third party documents and check our math.
-
EPD (Product Carbon Factors) A1–A3: [X] kg CO₂e per m² @ [Y] mm
-
VOC & IAQ Low VOC; testing per [method/standard]
-
Certifications & methods EPD/HPD/CDPH method references as applicable
Project carbon results depend on scope, baselines, and assumptions. Use our calculator for project specific estimates and contact us for a reviewed model.
Carbon Calculator Spec
Inputs (user):
- Area (m₂)
- Layer thickness (mm)
- Product density (kg/m₂) (pre-filled)
- Levelcore product carbon factor, A1–A3 (kg CO₂e/kg or per m₂ @ thickness) (pre-filled from EPD)
- Transport distance to site (km) and mode (optional)
- Baseline product carbon factor (dropdown with “conventional” options or custom)
Core math (behind the scenes):
- Mass installed (kg) = Area × (Thickness/1000) × Density
- Embodied carbon (A1–A3) = Mass × ProductCarbonFactor(kg CO2e/kg)
– If factor is per m2 @ thickness, use that directly.
- Transport (A4, optional) = (Mass/1000) × Distance × EmissionFactor(mode)
- Compare to baseline % reduction and absolute kg COe saved.
Frequently Asked Questions
Do Levelcore products qualify a project for LEED points?
Our documents (EPDs, low‑emitting materials data) support documentation pathways. Points depend on the full project team’s choices
How is your carbon factor calculated?
From third‑party EPDs using standardized LCA methods. See each EPD for declared unit, system boundaries, and assumptions.
What about indoor air quality?
We publish VOC data and testing methods in our SDS/TDS. Check the Resources page for the latest versions.
Can I get a project‑specific estimate?
Yes—use the calculator and then contact us for a reviewed model with your exact assumptions.
CONTACT US
Ready to work together?
Book a consultation or request a sample through our local team.
LevelCore Headquarters
1800 717 398
WA Distributor
(08) 6372 1291
-
46 Buckingham
Dr Wangara WA 6065 - info@levelcore.com.au
Get in Touch
Reach out to our experienced team at Levelcore to discuss our range of premium flooring and construction solutions.