Our Product
LEVELCORE® Feather Pro
Self-Drying Feather-Coat Screed (10-Year Guarantee)
Ultra-fast, cement-based smoothing compound for a flawless, permanent finish – ready for most floorcoverings in as little as 12–24 hours (conditions dependent)
LEVELCORE Feather Pro is a premium, cement‑based feather‑coat screed for interior substrates. It mixes with water to a smooth, creamy mortar and dries via a self‑drying matrix that chemically binds its mix water. Apply from feather‑edge to smooth out imperfections over concrete, wood, ceramic and quarry tile—typically without primers or additives—and install vinyl, carpet or ceramic tile in 12–24 hours. Backed by a 10‑year guarantee.
Product Description
LEVELCORE Feather Pro is a premium cement-based feather-coat screed for interior substrates. It mixes with clean water to form a smooth, creamy mortar and dries via a self-drying matrix that chemically binds its mix water – reducing downtime between prep and installation.
Apply from feather-edge to smooth out imperfections over concrete, wood, ceramic and quarry tile. Suitable under vinyl, carpet and ceramic tile systems. See the TDS for substrate requirements and any priming exceptions.
Key Benefits
Ready for most floorcoverings in 12–24 hours (conditions dependent).
Self-drying technology (mix water is chemically bound).
Feather-edge finish for smoothing and minor levelling.
No primer required on many approved substrates (see TDS for exceptions).
Multi-substrate interior use: concrete, wood, ceramic and quarry tile.
Creamy, easy-trowel mix (powder + clean water only).
Covered by a 10-Year Limited Guarantee when installed as directed
Suitable substrates(Interior)
Concrete
Sound, clean, properly cured.
Wood
structurally sound, securely fastened underlayments
Ceramic & quarry tile
Well bonded, deglossed / cleaned
Always prepare substrates per industry standards and remove dust, grease, sealers, and weak material
Compatible Floorcoverings
Vinyl
sheet / tile / plank
Carpet
And approved underlays
Ceramic tile
Always confirm adhesive and floorcovering manufacturer requirements before installation.
Simple Application Overview
1.
Prep
Clean, sound, dry interior substrate; abrade glazed/contaminated surfaces.
2.
Mix
Add powder to clean water and blend to a smooth, lump-free creamy mortar (see TDS for water ratio).
3.
Apply
Trowel from feather-edge to desired build for localised smoothing.
4.
Install
Most floorcoverings can be installed in 12–24 hours under normal conditions (verify readiness)
5.
Protect
Protect from traffic and moisture until covered.
Technical Highlights
Mixing Ratio
Approx. 5.5 liters of clean water per 20 kg bag
Pot Life (20°C)
Around 30 Minutes
Subsequent Floor Installation Time
1–2 hours to be walked on (Under normal condition)
12–24 hours to install floor covering
Material Coverage Rate
Approx. 1.5 kg/m² per 1 mm thickness
Shelf Life Storage
12 months (stored in a cool, dry place in original unopened packaging)
For further information consult our Technical Department.
Technical Downloads
LEVELCORE Feather Pro is a premium cement-based feather-coat screed for interior substrates. It mixes with clean water to form a smooth, creamy mortar and dries via a self-drying matrix that chemically binds its mix water – reducing downtime between prep and installation.
Apply from feather-edge to smooth out imperfections over concrete, wood, ceramic and quarry tile. Suitable under vinyl, carpet and ceramic tile systems. See the TDS for substrate requirements and any priming exceptions.
For safety information, handling instructions, and regulatory details, please download the Safety Data Sheet (SDS) using the button below.
For detailed technical specifications, application guidelines, and performance data, please download the Technical Data Sheet (TDS) from the button below.
VOC Emissions Test Report
Third-party laboratory results for VOC emissions/IAQ compliance evidence. Use this document for specification and project submission requirements.
Warranty Details
Feather Pro can be covered under the LevelCore 10-Year System Warranty when warranty requirements are met, including:
- Installed by a LevelCore Accredited Installer
- Follow the relevant TDS strictly (prep, ambient conditions, mixing, application)
- Installation recorded with required QA documentation
- Use the full LevelCore system (mixing brands / using non-LevelCore products voids warranty)
10-Year System Warranty
QA submissions:
Submit QA forms and media within 5 working days via the Levelcore Portal or email.
Warranty contacts:
warranty@levelcore.com.au | 1800 717 398
Frequently Asked Questions
Do I need a primer?
On many approved interior substrates – concrete, wood, ceramic and quarry tile – no primer or additives are required. Check the TDS for exceptions.
How soon can I install floorcoverings?
In typical conditions, 12–24 hours. Always verify readiness before proceeding
Is Feather Pro self‑leveling?
It is a self-drying feather-coat smoothing compound for skim coats and localised smoothing, not a deep-pour self-levelling underlayment.
Where can I use it?
Interior applications only, over properly prepared and sound substrates.
Is it covered by a warranty?
Yes – 10-Year Limited Guarantee when installed as directed (see warranty document)