Our Product
REVEAL STONE
LEVELCORE Polished Concrete Topping
A flawless polished‑concrete look—
installed fast, over new or existing floors.
A flawless polished-concrete look – installed fast, over new or existing floors. Levelcore’s polishable concrete topping is a high-performance cementitious overlay poured thin, then mechanically polished to a seamless, high-end finish. It delivers uniform aesthetics without relying on the look or condition of the structural slab – making it ideal for internal commercial and residential spaces
Product Description
A polished concrete topping (also called a polishable overlay) is a specialised cement-based layer installed over a prepared substrate at a controlled thickness. After placement, it is ground, densified, and polished – like a traditional slab – to achieve a durable, low-maintenance architectural finish with consistent colour and sheen.
Key Benefits
Uniform colour and finish across the entire floor (reduced patchwork look).
Covers worn, stained, or patchy concrete without demolition.
Thin build can shorten programs and reduce downtime.
Adds minimal height and weight versus installing a full new slab.
Customisable: matte to high gloss finishes, tinting options, saw-cut detailing, decorative aggregate seeding.
Seamless look across large areas with planned movement joints.
Sustainable renovation approach by building over serviceable substrates.
Comparison at a Glance
Feature
Reveal Stone Polished Concrete
Polished Structural Slab
- Aesthetic predictability
- Covers stains/patches
- Program speed
- Height/weight impact
- Color options
- Joint appearance
- Best for renovations
- High (controlled mix & thickness)
- Yes
- Fast (thin build, rapid options)
- Low
- Broad (integral tints possible)
- Planned and minimized visually
- Excellent
- Variable (depends on existing slab)
- Often telegraph through
- Medium (more grinding/repairs)
- N/A (uses existing slab)
- Limited to slab’s natural look
- Existing joints/cracks remain
- Case by case
Note: Both systems are mechanically polished concrete and deliver long life, low maintenance surfaces. The right choice depends on your substrate condition, schedule, and design goals.
Where It's Used(Internal Only)
Commercial
Retail, cafes and restaurants, lobbies, offices, galleries, education, healthcare reception, showrooms, hospitality, multi-res common areas.
Residential
Open-plan living, kitchens, hallways, stairs (treads/landings), home offices, basements/lofts.
Indoor use
Not intended for exterior or wet-room immersion. Speak with Levelcore for system options in high-moisture or heavy chemical areas.
How We Install
Assess and test: moisture, flatness, soundness, movement joints.
1.
Prepare
Mechanical grind/shot-blast, crack/void repairs, priming/bond coat.
2.
Place And level
Pumped or hand-placed to specified thickness.
3.
Initial grind
Flatten and open surface after cure
4.
Densify And polish
Progressive grit refinement to target sheen.
5.
Protect and Handover
Guard/sealer, planned joints, edge details, maintenance guidance
Specification Snapshot
System
Levelcore™ polishable cementitious topping
Typical thickness
10 – 15 mm (project specific; thicker builds available)
Finish levels
Matte, satin, or high gloss
Colouring
Natural mineral grey or integrally tinted custom tones
Detailing
Saw-cuts, borders, logos; optional seeded decorative aggregates
Slip performance
Adjustable with finish profile and guard coat to suit use zone
Underfloor heating
compatible (confirm system and temperature limits)
Maintenance
Dry dust mop + pH-neutral cleaner; periodic burnish/repolish as needed
Technical Downloads
A polished concrete topping (also called a polishable overlay) is a specialised cement-based layer installed over a prepared substrate at a controlled thickness. After placement, it is ground, densified, and polished – like a traditional slab – to achieve a durable, low-maintenance architectural finish with consistent colour and sheen.
For safety information, handling instructions, and regulatory details, please download the Safety Data Sheet (SDS) using the button below.
For detailed technical specifications, application guidelines, and performance data, please download the Technical Data Sheet (TDS) from the button below.
VOC Emissions Test Report
Third-party laboratory results for VOC emissions/IAQ compliance evidence. Use this document for specification and project submission requirements.
Warranty Details
Reveal Stone can be covered under the LevelCore 10-Year System Warranty when warranty requirements are met, including:
- Installed by a LevelCore Accredited Installer
- Follow the relevant TDS strictly (prep, ambient conditions, mixing, application)
- Installation recorded with required QA documentation
- Use the full LevelCore system (mixing brands / using non-LevelCore products voids warranty)
10-Year System Warranty
QA submissions:
Submit QA forms and media within 5 working days via the Levelcore Portal or email.
Warranty contacts:
warranty@levelcore.com.au | 1800 717 398
Frequently Asked Questions
Is a topping as durable as polished concrete?
Both are concrete surfaces finished by mechanical polishing. Performance depends on mix design, thickness, preparation quality, and maintenance program.
Will existing cracks go away?
Toppings can bridge cosmetic defects, but building movement still needs planned joints. Some substrate conditions may reflect; the system is designed to minimise this.
Can I choose the exact shade and sheen?
Yes – natural greys and integral colour options are available, with matte, satin or high-gloss finishes.
Is it suitable for kitchens and cafés?
Yes – when paired with the right guard coat and cleaning regime. For grease/acid exposure, specify an appropriate maintenance plan.
What about underfloor heating?
Compatible – advise the system type so the build-up and expansion strategy can be detailed correctly.